Epoxy Floor Coating


Epoxy Floor Coating :


Epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor.

High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.

High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life. Normally Tollens Epoxy primer grey A+B mixing pot life is 4hrs.As a diluent use Tollens Epoxy thinner 15 – 25 %.

Description :


This product has excellent adhesion to most substrates, easy to clean, and when cured have excellent resistance to water, mineral oils ,chemicals ( various acid and alkali solution in mild form)

Application & Reduction:

Tollens Epoxy Finish can be brushed, rolled or sprayed. .Use where application temperature can be proceed above 4C Wash surface thoroughly with fresh water, After drying apply one coat of epoxy sealer primer. Allow to cure 16-20 hours and than apply 2 coats of Tollens Epoxy Floor Coating.

Surface preparation:

Surface to be coated must be clean, structurally sound and free of all foreign contaminants.

Precautions:

Use with adequate ventilation May cause eye, nose, and throat and skin irritation. Keep out of the reach of children Do not use in tank or pit without proper protection