It is a blend of Alcohol's, Aromatic Solvents and specialty solvents. This thinner is recommended for spray application of oil based Enamels, Primers, Nitrocellulose Paints, Acrylic Paints and Epoxies. This is also recommended for cleaning of equipments & tools. It is strictly not recommended for Polyurethane coatings.
Colour : Crystal Clear
Non-volatile matter : NIL
S.g kg/l :0.850±0.05
Flash Point (ASTM D93): Not less than 12 °C
A white smoothly applied filler for all surfaces, mostly concretes, woodwork and plaster.
Application & Reduction:
Use putty knife for application, apply carefully and do not exceed the thickness ½ -1 mm at a time. It is advisable do not fill the leak holes with stucco/putty. Thinner/cleaner –water.
Surface must be clean and free of, chalk, dust,and other contaminants. Clear the surface with wire brush, remove any loose adherence. Proper surface preparation will play a significant role, in order to achieve the required results.
Keep from freezing, contains water. May cause eye, nose, and throat and skin irritation. Keep out of the reach of children.
Metal drums one US gallon, 5 US gallons.